Configuration of NC generator

The configuration of the NC generator is not integrated in the Comfit menu item. Reason:

the configuration is stored depending on the driver. The relevant configuration is selected directly from the currently installed driver in the NC generator menu.

Due to the settings made in the NC generator configuration (e.g. filter parameters, production parameters, data creation parameters, ...), there may be conflicts between the fixtures, reinforcement, .... created automatically when designing or modifying or entered or modified manually and the bars, girders, fixtures, .... saved in the production files by the NC generator. This means that,various bars, girders, fixtures, .... might not be transferred to production.

The factory configurations and catalogs must always be consistent with the NC generator configurations. This should be checked and adjusted by experienced users only!

Note: The elements displayed graphically by the NC generator are not (!) suitable for checking production data as these graphics may differ from the bars, girders, fixtures, .... that are actually saved in the production files. In particular, it can happen that bars, girders, fixtures, .... are not saved in the production files although they are displayed.

Overview of configuration entries:

Reinforcement parameters

Cross wire machine

Longitudinal wire machine