NC generator configuration, fixtures

Data blocks for fixtures for statistical evaluation (LEIT 2000).

'General fixtures' tab

Max. number of data blocks:

You can set a maximum for the number of data blocks. If a pallet exceeds this number, then the rest of the data is discarded.

Search area for linear fixtures:

LEIT2000

Place fixtures:

Flag for the automatic production of fixtures (formwork robot).

Remove formwork due to:

for all smart symbols (SYM+FIX), fixture catalog applies

The formwork commands (or edge attributes in accordance with ULB interface) can be removed.

You can specify whether an opening for which a smart symbol has been defined is to remove the formwork or whether the fixture catalog is to apply.

Consider fixture height for reinforcement robot:

No, By panel, By pallet

Fixtures in panels or on pallets are taken into account when the program calculates the z coordinates of the reinforcement.

´MRP display’ parameter from catalog filters fixtures:

Applicable to Unitechnik interface: when ”none” is enabled in the fixture catalog, the fixture is suppressed. Otherwise, this parameter is ignored and the fixture is still transferred (ULB standard).

Use fixture file:

You should not use this parameter (ensures a compatibility with AIA-CAD Version 7.20 or earlier). Fixtures are only transferred when they are defined in an ASCII-format file.

Transfer poured joints as fixtures:

No, Solid wall, Solid slab, Solid wall+slab

When enabled, poured joints (connection joints) of solid precast elements are transferred as fixtures.

Type/installation codes:

Type and installation codes for poured joints transferred as fixtures.

Transfer position symbol:

When enabled, a symbol (fixture) is written and transferred in the bottom right corner of the panel.

Transfer girders as fixtures:

No, Slab, Wall, Slab+wall

When enabled, girders are transferred as linear fixtures.