Configurations for external programs

Configurations for Precast Elements + Process Planning

A works-specific configuration is available for each external process planning program. Press F1 WorksPara to activate the works parameters.
In addition, you can define the following general configurations in the external application for process planning.

F3 ProgPara

Program sequence parameters configuration

F4 Printer

Printer configuration

F5 Plotter

Plotter configuration

F6 Colors

Color settings configuration

F8 Article

Article configuration

F9 Comphead

Company header configuration

NC generator configuration

The configuration of the NC generator is not integrated in the configuration of the external programs. Reason:

the configuration is stored depending on the driver. The relevant configuration is selected directly from the currently installed driver in the NC generator menu.

Notes on using the external configuration program

The configuration of the program sequence parameters, plotters and color settings is defined in a configuration program. When you have specified a password in the factory-specific configuration menu, you need to enter it after having selected entries. If you do not enter the (correct) password, the parameters will be grayed out and unavailable.

You can select the entry of the configuration file you want to edit on the left. The number and names of the tabs displayed on the right vary depending on the selected configuration file.

Saves changes in the open configuration.

OK Closes the configuration. Attention: the program saves the changes without asking you to confirm.

Cancel Closes the configuration. If data have changed, the program will issue a prompt.

<F1> Displays the help system.