|
|
|
Calculation tasks are used to perform certain steps in the static calculation.
Calculation tasks are performed automatically when using certain tasks, if the task is associated with a calculation task.
However, calculation tasks can also be defined directly.
In the following you can find an overview of the available calculation tasks with their meanings and descriptions:
Calculation task |
Meaning |
Description |
INSTCONC*) |
Install concrete |
Activate concrete elements |
Load case self-weight |
Calculate self-weight (load case) |
|
Tendon stress |
Evaluate tendon stressing |
|
Load case stress |
Calculate prestressing (load case) |
|
Tendon grout |
Establish bond betw. tendons and CS |
|
Load case creep |
Calculate creep & shrinkage (load case) |
|
Load case add to |
Add a load case to another load case |
|
Load case copy |
Copy a load case to another load case |
|
Load case reset |
Initialize load case |
|
Deactivate |
Deactivate elements |
|
Load case transfer |
Calculate the redistribution due to the deactivated elements |
|
Load reference |
Calculate a load case with reference to an existing load case |
|
Load case reference |
Calculate a load case with reference to an existing load case |
|
Influence (line) |
Calculate influence line |
|
Eigen (values) |
Calculate the eigenvalues |
|
Earthquake response |
Evaluate a defined earthquake event |
|
Superposition tree |
Evaluate a defined superposition |
|
Combination row |
Evaluate a particular combination |
|
Combination group |
Evaluate all combinations of a combination group |
|
Envelope delete |
Delete an existing envelope |
|
Load case dump |
Create list of load case results |
|
Superposition dump |
Create list of envelope results |
|
Influence (line) dump |
Create list of influence line results |
|
Eigen (value) dump |
Output the displacements from the eigenvalue calculation (list) |
|
Eigen (value) report |
Output the results of the eigenvalue calculation (Excel) |
|
Camber (report) |
Calculate and output pre-camber (Excel) |
|
Tendon report |
Output tendon data (Excel) |
|
Axis report |
Output axis data (Excel) |
|
Plot views |
Create image files of 2D-diagrams |
|
Set element value |
Assign specific values to particular elements |
|
Load case |
Calculate a user-defined load case |
*) INSTCONC is not available via the user interface, since it is called up by HARDEN and CONCRETE, respectively, or by the task INSTCONC.
Additional definitions of certain calculation tasks are performed after creating them via their respective Property windows.
The results of calculation tasks which are based on a load case calculation are stored in load cases.
The designation of the load case is set up as follows: Load case name (t), i.e. Load case name + postfix of the time of its definition/calculation in the construction phase in brackets, e.g. SW-SUM (21), if the load case is calculated at the time 21 in the construction phase.
|
(C) ALLPLAN GmbH |
Privacy policy |
