LCDUMP

Output the load case results of a calculated load case in a list, i.e. text file of the type *.lst

The file is stored in a subfolder of the project directory with the name “LoadCases” under the name lc_day (see below) and can be opened with any text editor for viewing.

It contains the calculated displacements and internal forces (primary and total) of the beam elements, the tendon forces (primary and total), as well as stresses (normal stresses and shear stresses, primary and total) in the defined stress points.

Arguments

lc (load case)

Load case name

day

Day of the definition/calculation of the load case in the construction phase

If this input is missing, the day is determined by the time (start day) at which the calculation task LCDUMP is performed in the construction phase.

Example 1: lc = SW-SUM, day = 21; refers to the load case SW-SUM (21); it is saved to the file SW-SUM_21.lst.

Example 2: lc = SW-SUM, day = no input; refers to the load case SW-SUM (21), if the calculation task LCDUMP is performed at the time (start day) 21; it is saved to the file SW-SUM_21.lst.