Element parameters for facing elements

Attributes

Element type

Select an element type in the element type catalog. The list box includes all the entries that are assigned to the selected wall element and the current factory.

Concrete grade

Select a concrete grade from the catalog.

Exposure class

Enter the appropriate exposure class.
You need to include the exposure class in reinforcement drawings according to DIN 1045-1, section 4.2.1 (3). Among other things, cement formulation, minimum concrete cover and minimum concrete strength grade depend on the exposure class.

Surface of visible / invisible side

Select a surface from the surface catalog. The list box includes all the entries that are assigned to the current factory.

Reinforcement type

You can specify whether and how basic reinforcement is created by selecting None, Free or Attached.

Rotated production from

This parameter is only displayed if the Reinforcement type is set to Attached basic reinforcement. Wall elements exceeding this value are rotated when they are transferred to production and attached reinforcement is calculated correctly.

Reinforcement

This area is only displayed if the Reinforcement type is set to Free or Attached basic reinforcement.

Basic reinforcement

If you are reinforcing in accordance with as-req., you can limit the reinforcement types to those complying with the Search code specified. You can select the reinforcement type manually or configure Allplan to automatically determine a type based on the required as-value.

Enter the concrete cover and the as-Values or select the reinforcement type. You can make these settings separately for the inside and outside reinforcement.
You can set additional reinforcement parameters. To do this, click in the relevant line.