Surface catalog

Module(s): Catalogs

'General' tab

Created on:

Date of creation of the data record.

Last modified:

The most recent modification date.

Name:

User-defined name for the surface displayed in wall panel design and in the list box of the Design configuration entry for entering wall panels.

Mark text:

Text used for the OberFlS1 and/or OberFlS2 variables in the label of the mark number line if the entire element has the same surface.
If a special surface is assigned to a part of the element, the text defined in the Labeling configuration entry (Miscellaneous tab) is used.

Full name:

User-defined description providing detailed information on an individual surface.

Description:

User-defined name that can be included in labels for element plans or lists/schedules.

'Production' tab

The following settings are taken into account when production data is created.

Name of spacer / Granularity:

The text you enter for the spacers to be used and the granularity are transferred as wall attributes to production.

Surface fixture:

You can assign a surface fixture from the fixture catalog to the surface. You need to make this assignment if you want to transfer the surface to production. Select a fixture in the list box.

'Display' tab

Surface elements

You can specify whether a Hatching style, Pattern or Fill is applied to the surface when you modify it or for associative views.

To select a surface element, select the relevant check box, click in the box and select the surface element you want to use. To switch a surface element off, clear the relevant check box. If all check boxes are cleared, surface elements are not displayed.

Note: In addition to a fill, you can also select a hatching style or pattern; in this case, the fill is used for the background color.

Animation

When you select the Surface check box, the surfaces is displayed in animation. Click to select a texture file, which is then displayed in the box.

'->Fact.' tab

Assignment of the individual entries to the relevant factories.

The selected entry is applicable to the selected factories. If no factory is selected, the entry is valid for all the factories.