Pallet plan

Module(s): Process Planning

You can output single schemas of the panels, pallet loading layout plans or Kombiplans on a laser printer or plotter. To include instructions for production planning in a single panel schema for slab elements, for example, you need to save these instructions as smart symbols.

Start the program and select individual pallets of the current project. When you have defined several plotters in the Plotter configuration , you can then select the output medium.

The following menu is displayed:

F1 Start

Starts data entry.

F3 Copies

Specifies the number of copies.

F5 Format

You can change the paper format for layout plans.

F7 Orientation

You can choose between portrait and landscape for layout plans.

S1 Kombi, S2 Layout

You can select between layout plan or Kombiplan before the program starts. Layout plans only display the set number of pallets used. In addition to the single panel schema of the relevant wall or slab element, Kombiplans display the pallet on which the element is placed in the upper part of the sheet.

S7 Sector

If you selected the screen driver (monitor) e.g., for checking purposes, then any section can be enlarged. After defining the selection window, you have to press F1 Start again.

S8 Sec.MAX

The previously enlarged section is restored. To ensure that all elements are displayed correctly, press F1 Start again.