Modify/Label Reinforcement

Module(s): Precast Floor + Precast Wall
Tool(s): Edit Element + Element Plan

You can use the Modify/Label Reinforcement (How) tool to change or label basic or secondary reinforcement any time after creation. In particular, you can do the following:

Activate Modify/Label Reinforcement in one of the following ways

• Menu bar: Modify Precast Factories Precast Floor/Precast Wall

• Palette: Tools Modify area in the following module(s):

Precast Floor

Precast Wall

Label Bar Mark

You can use this to label any placement without a label (from the Edit Element tool) any time later.

Label Mesh Type

You can use this to label any mesh placement without a label (from the Edit Element tool) any time later.

Label Mesh Dimensions

You can use this to add labels to mesh dimensions later.

Label Stirrup Cages

You can use this to add labels to stirrup cages later.

Modify Mark

You can use this to modify secondary reinforcement marks (diameter, mesh type, ...).

Modify Placement

You can use this to change placements (number off, offset, ...).

Modify Secondary Girders

You can use this to modify secondary girders (mark number, girder type, ...).

Modify Stirrup Cages for Mesh Welding System

As this function can be used in a lot of different ways, which largely depend on the technical requirements of the machine used, it is not described in detail here.

You can use this to modify stirrup cages for mesh welding systems.

Modify Stirrup Cages

You can use this to modify stirrup cages (number off, offset, diameter, bending shape, ...).

Modify Stirrup Meshes

You can use this to modify stirrup meshes (mesh type, bending direction, bending shape, ...).

Activate/Passivate Basic Reinforcement in View or Plan

You can use this to activate/passivate basic reinforcement

Delete Mark

You can use this to delete secondary reinforcement marks.