‘Formwork Attributes for Panel Edges’ dialog box

Tool(s): Slab/roof element design, basic parameters + Modify Parameters, Basic Reinforcement

This is where you define the formwork attributes for the individual panel edges. You can define default settings in the configurations.
You can combine the attributes as you need. Note, however, that the program does not check whether these combinations make sense.

These attributes are only analyzed when you use the Unitechnik ULB interface (version 4.0 or later). The elements are transferred as polylines. A formwork attribute is transferred for each polyline.

Restore basic settings

To protect user-defined input parameters from unwanted or unauthorized alteration, any changes you make to the configuration are not automatically updated. You can use Restore basic settings to replace the existing parameters with the default parameters specified in the configuration.

Note: The default parameters are also used when you create a new factory.