|
|
|
Description
Definition of a horizontal surface load acting normal to the member
Arguments
The basic arguments correspond to those of all tasks (cf. TCL Command TASK). The other arguments are to be entered in the form "key=value".
There are the following additional specific predefined arguments, cf. UI-input of LOADPAZ:
Key |
Value |
Dimension |
Meaning |
uload |
iunit |
INT |
Number of the load in the cross section to define the load position and width |
q |
qbeg |
FORCE/(LSTRUCT*LSTRUCT) |
Load value at begin |
qe |
qend |
FORCE/(LSTRUCT*LSTRUCT) |
Load value at end (linear or parabolic) |
qm |
qmid |
FORCE/(LSTRUCT*LSTRUCT) |
Central load value (parabolic) |
pos |
pname |
TEXT |
Load application point in cross section (uload not in use) |
leff |
height |
LSTRUCTD |
Width of the area to which q is applied to (uload not in use) |
Scopes
LOADCASE, TASKS
Examples
TASK LOADPAZ 1 LOCAL 0 6 "q=5.000" "qe=10.000" "qm=10.000"
A parabolic distributed horizontal area load is assigned to assembly 6.
|
(C) ALLPLAN GmbH |
Privacy policy |
