Example for concrete covers of bent-up meshes

A 1st point of placing line

A 2nd point of placing line

C Concrete cover (start)

D Concrete cover for placement

E Concrete cover (end)

Note: This button is only available when Reinforce with 3D model is not active. If you are working in Reinforce with 3D model mode, number off management is automatic. In this case, this parameter does not need to be modified by the user.

When the button is set to +, the number off information for meshes that have already been placed increases by one with every additional mesh that you place.

If you merely want to display a mesh that has already been placed in a different view, you can lock this counting feature temporarily.

Click + or - to block or reactivate the counting function:

• + means that the function continues counting
• - means that the function stops counting (i.e. off)

You can query the length and width of individual meshes within the current placing area.

Click the desired mesh in the workspace.

The mesh is displayed in the selection color and its dimensions are displayed in the dialog line.

Note: If you have configured the program to display meshes as a group, the dimensions of the individual meshes will not be output. Rather, the dimensions of the entire group will be displayed.