Place individually

Tool(s): Secondary Meshes

To place single meshes

1. Click Place Individually in the Secondary Meshes Context toolbar.
2. Select the panel in which the meshes are to be placed.
3. Define the location of the placement in space so as to establish the relationship (distance) between the defined spatial plane and the placement.
4. Click OK to confirm the settings.
5. Click Use Mesh Type and select the mesh type to be placed:
   

   All meshes defined in the Cross-Section Catalogs are available.

   You can use the Mesh Type button to select a defined mesh from the list box.

   • Click Mesh Type to select a defined mesh type in the list or
   • enter the mesh identifier manually or
   • click Match to copy the settings from a reinforcing steel mesh you have already placed.
6. When set to Use MWS Mesh, define the parameters by clicking MWS Settings or Copy.
   

   This setting places special meshes in the form of attached reinforcement. These MWS meshes are produced in special mesh welding plants.

   You can define the settings for attached reinforcement in the General area of the Configuration Menu.

7. Enter the parameters for the single meshes in the Context toolbar.
8. Specify the placement point.