Enter

Tool(s): Additional Bars, Freeform

To enter freeform additional bars

1. Click Enter in the Additional Bars, Freeform Context toolbar.
2. Click the stirrup cage which you have created using FF Reinforcement and which you want to associate with the bar (provided you have selected Ask for assignment to stirrup cage in the Configurations).

   If you do not want to assign the bar to a stirrup cage, press ESC to continue.

3. On the context toolbar, select a bending shape to define it.
4. Enter the geometry of the bending shape.
5. If you have not entered the bar in an existing view, you need to assign it to a view. However, this does not clearly define the position in space.
6. Set the label parameters, place the definition bar label (you can define the text angle in advance) and create the manual leader if required
   or
   click Cancel if you want to skip labeling.
7. To immediately place the bar you just created, select a placing mode.