Tool(s): Change Hollow Blocks/Concrete Strips/Filling Objects/Bricks Tool(s): Change Hollow Blocks/Concrete Strips/Filling Objects/Bricks
The following parameters are provided in the dialog box:
Match parameters
You can use this button to copy the parameters from existing filling objects.
Delete
When you select this button, the program deletes the selected filling objects after you have confirmed the dialog box. You can undo this operation by clicking 
Undo on the Standard toolbar.
Name
This is where you can change the custom name of the filling objects.
Height
Use this to change the height of the filling objects.
Label
When you select this button, you can label the selected filling objects after you have confirmed the dialog box. The label includes the panel thickness, height of the filling objects and the remaining height of the total slab thickness.
Press ESC if you want to skip labeling.
Display
You can toggle between the Enclosing and Hatching display modes (provided you have set one of these two display modes in the Configurations). If you have configured the program to display filling objects as a 3D model, you cannot make any changes here.
Hatching
You can change the hatching style used to display filling objects (provided you have selected the Hatching display mode).
| (C) Allplan GmbH | Privacy policy |
