Modifying wall connections

Modifying elements using the Properties palette

You can use the Properties palette to modify the current parameters of the selected wall connection.

Right-clicking in the input area of the palette opens a shortcut menu where you can show and hide the description displayed at the bottom of the palette.
In addition, you can add the currently selected area or parameter to the quick input list and move QuickInput to the top of the palette so that it is the first tab displayed in the palette. Similarly, you can remove the currently selected area or parameter from the quick input list. As soon as you remove the last parameter from the quick input list, the QuickInput tab is hidden. To make sure that QuickInput is always open when the palette starts, select Start with QuickInput on the shortcut menu.

This section provides detailed information on the parameter currently selected. If there is not enough space to display the entire text, three dots at the end of the text indicate that some text is missing. You cannot scroll the description.

To enlarge the section so that you can read the full text, you can increase the width of the entire palette and/or move the line separating the parameter area from the description up.

To modify a wall connection

1. Select one or more wall connections and click Precast element connection in the list box at the top in the Properties palette
   or
   Double-click the precast element connection with the left mouse button.
   

   • To select a single element, click it.
   • To select elements in a region, use the left mouse button to open a selection rectangle around the elements you want to select
   • To include all the elements in the current document, click All in the Input options or press CTRL+A. Please note that this option is not available for all tools.

   For more information on the options available for selecting elements in Allplan, see Selecting elements, overview.

   When selecting elements, you can use the Filter Assistant to apply a filter based on element types and/or properties. For more information, see Filter Assistant.

   When you have selected several wall connections, only values of identical parameters are displayed. You can change different parameters, of which the values are not displayed, to new, common parameters.

2. If necessary, click Division joint(s) to mandatory joint(s) in the toolbox of the palette to convert the current division joints to mandatory joints and thus make it possible to modify the joint(s). Use the Delete tool to delete the mandatory joint(s). This produces division joints again.
   

   You can find the toolbox above the tabs with the parameters. It contains the tools appropriate to the task at hand. These tools are always arranged on the left and they reflect the usual sequence in which you go along. They are followed by additional tools, which vary depending on the main tool selected.

   As soon as you select a new main tool, the current palette closes and a new palette opens. After this, it is usually necessary to select the objects again.
   The additional tools, on the other hand, always apply to an object you have already selected. A new palette is not opened.

3. Change the connection parameters and adjust the layers, if necessary.
   

Note: You can find additional tools at the bottom of the palette:
You can use Match parameters to match the parameters of a different wall.
You can use Save as a favorite to save the settings and Load favorite to read the settings back into the palette, where you can modify them. Click Favorite QuickSelect to select from the five favorites you have used most recently.
Click Options to modify the settings of the Configuration menu.