Folder, file name

Contents

Special features

Roof covering.rdlc

All layers of a Roof Covering by material and layer, including graphics, material, component ID, dimensions, thickness and area for each layer; total area for each material and layer; final total.

All recesses are subtracted.

Slabs.rdlc

Slabs of any kind created with Slab; including material name, graphics, thickness, area (with/without slab openings), volume and total volume for each material.

There are three types of area calculations: without subtractions, including subtractions and areas in accordance with VOB (German building regulations). There is one column for each type.

Foundation, overview.rdlc

Foundation created with Strip Foundation, Block Foundation, Slab Foundation and Any 3D Foundation; including material, number of pieces, quantity and unit for each foundation type.

The calculation mode specified is used for quantity takeoff.

Foundation.rdlc

Foundation created with Strip Foundation, Block Foundation, Slab Foundation and Any 3D Foundation; including material name, dimensions, height and volume for each foundation type and material; total volume for each material and foundation type; final total volume.

User-defined archit. elements.rdlc

Unfinished dimensions of user-defined archit. elements; including material name, graphics, component ID, net volume and total volume for each material; final total volume.

Analyzes architectural elements created with the User-Defined Archit. Element tool (Rooms, Surfaces, Stories module) and any solids from the 3D Modeling module which you have converted to user-defined architectural elements and to which you have assigned architectural attributes using the Change U-D Element's Properties tool (Rooms, Surfaces, Stories module).

Quantities - overview.rdlc

Overview of quantities by story and material, including material name, short text, component number, number of pieces, length, thickness, height, perimeter, base area, volume and volume to be subtracted; total for each material and story.

landscape format

In the Report Viewer, Parameters palette, User Interaction area, you can filter by component and material and show and hide the component numbers.

Based on the component number, you can zoom in on and select report elements in the workspace.

Note: If you want to analyze 3D solids with architectural attributes, you first have to convert them to user-defined archit. elements using the Convert Elements tool.

Roller shutter housing.rdlc

Components created with Roller Blind Housing; including material name, component ID, width, height, length and total length for each material.

Chimney.rdlc

Components created with Chimney; including graphics, component ID, dimensions, height, base area and volume for each material; final total.

The dimensions of custom outlines are specified in m².

Lintels, headers.rdlc

Components created with Lintel, Header; including material name, component ID, width, height, length and total length for each material.

Columns.rdlc

Column-shaped components created with Column; including graphics, component ID, dimensions, height and volume for each story and material; total length and volume for each material, story and final total.

The dimensions of custom outlines are specified in m².

Downstand beams.rdlc

Components created with Downstand Beam, Upstand Beam; including material name, width, height, length and volume for each material; total volume for each material and final total.

Walls by calculation mode.rdlc

Wall created with Wall; including an overview of materials per story; analyses for each calculation mode and material; including graphics, material, dimensions (with calculations), thickness and quantity; total for each calculation mode and material; final total.

Openings are taken into account in accordance with VOB (German building regulations).

Walls.rdlc

Wall created with Wall; including graphics, thickness, area (with/without openings) and volume for each story and material; total for each material and final total.

There are three types of area calculations: without subtractions, including subtractions and subtractions in accordance with VOB (German building regulations). There is one column for each type.