Design configuration entry

Configuration(s) Double wall (new): entry + Concrete wall (new): entry + Thermal wall: entry + Sandwich wall: entry

Initial values for wall element design.

'Parameters' tab

Additional text for mark number:

Complementary text for mark number.

Create surface(s) as:

You can specify whether the surfaces are to be created as Attribute(s) or as Fixture(s) (analogous to wall panel elements created with the Design tool).
When you choose the Fixture(s) option, you need to select a surface fixture for transfer to production in the Surface catalog on the Production tab.

'Marks' tab

Assignment of marks:

Specify which mark numbers are assigned to precast elements when they are created. Elements that are modified later are also given the mark numbers specified here. This also applies if you have rearranged the elements manually using the Modify Mark Number tool in the meantime.

Zero: the elements are initially assigned the mark number zero and will be rearranged manually later.

Ascending: the elements are assigned numbers in ascending order.

Identical: while creating elements, the program automatically performs various checks based on the following criteria:

• Identical geometry (volume, outline, recesses, ...)
• Identical element attributes (material, …)
• Identical number and position of fixtures and identical fixture attributes and variables
• Identical reinforcement (position of reinforcement in precast element, parameters, bar parameters such as bending pin diameter, hook lengths, …) and reinforcement attributes (e.g. steel grade)
  

'Favorites ...' tab

[Wall type] - design mode / divisions / basic reinforcement, ...:

You can specify the default favorite to be used when you Reset input parameters. The default favorites are in the '...\std\Favorites - office' folder.