Path, parameters

Enter path as a line + Enter path as an area + Enter path as a spline + Modify Landscaping Elements

No

You can define several layers of pavement. The numbers of the individual layers of the path are displayed. You define each layer in a separate line.

Material/qualities

You can enter the material for each layer of the pavement. Choose the material from the catalog you select by clicking the Catalog assignment button.
Note: Allplan uses the material of layer number 1 for the label. The reports, however, list all materials.

Thickness

This is where you can enter the thickness for each layer of the pavement.

Factor

Enter a factor by which the material is multiplied.

Unit

This is where you can define the unit of measurement.

Trade

Enter the trade of the path.

Text

You can enter up to 5 lines of custom text.

Height

Click Height to define the height of the path.

Catalog assignment

Select the catalog you want to use for material selection.

Pattern line (for linear paths only)

When you select this check box, you can select a pattern. The path is then displayed as a pattern line.

Path width (for spline-shaped and element-oriented paths)

Enter the width of the path.

Border (for surface and spline-shaped paths)

You can enter a depth of the border to be applied to the hatching, pattern or fill.

Surface elements (for surface and spline-shaped paths)

You can choose to apply a surface element to the path and select the surface element. Hatching styles and patterns can be combined with fills.

Hatching

To assign a hatching style, click the box next to Hatching and assign a style.
If a background color is to be applied to the hatching, click the box next to Fill and select a color.

To disable hatching, deactivate the Hatching check box.

Pattern

To assign a pattern, click the box next to Pattern and select a style.
If a background color is to be applied to the pattern, click the box next to Fill and select a color.

To disable the pattern, disable the check box next to Pattern.

Fill

To assign a fill, click the box next to Fill and select a color.
In addition to a fill, you can also select a hatching style or pattern; the pattern is then used for thebackground color.

To disable the fill, deactivate the Fill check box.

Bitmap Area

To assign a bitmap area, click the box beside Bitmap area and select a file.

To disable the bitmap area, deactivate the Bitmap area check box.

Style Area

To assign an area style, click the box beside Area style and select a style.

Area styles must already be defined.

To disable the area style, deactivate the Area style check box.

Surface (animation)

You can assign custom surfaces to paths. You can also modify surfaces you have already assigned. These surfaces appear in viewports with the Animation view type (and in the Animation module).