"Stair" palette - "Plan view" tab

Stair palette

This tab is only visible when the Create 2D representation check box is selected in the Representation area on the Settings tab.

Use this tab to select the elements you want to display in 2D. In addition, you can define how the stair outline looks.

Walking line

Display the walking line, which consists of the line you use to design the stair and the symbols representing the starting step and the last step. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Symbol for starting step / Symbol for last step

Select the check box to display the stair element in plan view.

Shape

Select the shape of the symbol.

Diameter or Width / Height

Define the dimensions of the symbol.

Label

Display the stair label, which includes the number of rises and information on the rise and tread. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Text font

Select the font for the stair label.

Text height

Define the font size for the stair label.

Layer

You can set the layer for the stair element.

Color

You can set the line color for the stair element. Select the check box to take the line color from the layer set. Otherwise, you can choose any line color.

Pen

You can set the pen thickness for the stair element. Select the check box to take the pen thickness from the layer set. Otherwise, you can choose any pen thickness.

Line

You can set the line type for the stair element. Select the check box to take the line type from the layer set. Otherwise, you can choose any line type.

Step numbers

Configure the program to number the steps consecutively. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Position

Define the position of the step numbers in relation to the walking direction.

Offset

Define the offset of the step numbers in relation to the Position.

Starting with

Define the number with which numbering is to start.

Text font

Select the font for the step numbers.

Text height

Define the font size for the step numbers.

Layer

You can set the layer for the stair element.

Color

You can set the line color for the stair element. Select the check box to take the line color from the layer set. Otherwise, you can choose any line color.

Pen

You can set the pen thickness for the stair element. Select the check box to take the pen thickness from the layer set. Otherwise, you can choose any pen thickness.

Line

You can set the line type for the stair element. Select the check box to take the line type from the layer set. Otherwise, you can choose any line type.

Undercut

Display the tread undercut; this value is defined by the Offset at back on the Stair tread tab. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Layer

You can set the layer for the stair element.

Color

You can set the line color for the stair element. Select the check box to take the line color from the layer set. Otherwise, you can choose any line color.

Pen

You can set the pen thickness for the stair element. Select the check box to take the pen thickness from the layer set. Otherwise, you can choose any pen thickness.

Line

You can set the line type for the stair element. Select the check box to take the line type from the layer set. Otherwise, you can choose any line type.

Section line

Display the section line of the stair; usually at a stair height of 1.00 m measured from TL FF. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Offset

Define the distance between the parallel lines representing the section line.

Angle

Define the angle of the section line relative to the front edge of the step.

Format

Select the Separate check box to choose a Layer, Color, Pen or Line you want to use to display the section lines. The settings you define here are independent of the settings for displaying the stair below and above the section line.

Representation at bottom / Representation at top

Define how the stair looks below and above the section line. Select the Create option to define the parameters.

Create

Select the check box to display the stair element in plan view.

Layer

You can set the layer for the stair element.

Color

You can set the line color for the stair element. Select the check box to take the line color from the layer set. Otherwise, you can choose any line color.

Pen

You can set the pen thickness for the stair element. Select the check box to take the pen thickness from the layer set. Otherwise, you can choose any pen thickness.

Line

You can set the line type for the stair element. Select the check box to take the line type from the layer set. Otherwise, you can choose any line type.