Palette for Window/Door SmartParts, casement element

Palette for Window SmartPart/Door SmartPart, Elements tab + Window SmartParts + Door SmartParts

You can define the following parameters for the Casement element type:

Casement

Opening type

You can select the opening type.

Turn around

You can change the position of the casement from the inside of the frame to the outside and vice versa.

Stop - left / right

You can specify the opening direction.

Width - left / right

You can enter the width of the casement frame on the left and right sides.

Width - top / bottom

You can enter the width of the casement frame at the top and bottom.

Note: When creating a Casement element, you can also enter the value = 0 for the Width - left / right and Width - top / bottom. For example, this is useful if you want to create glass sliding doors without frames.

Depth

You can enter the depth of the casement frame.

Rabbet ledge

If you want to create a rabbet ledge, you can choose between a rabbet ledge on the inside and on the outside. Click (without) if you do not want to create a rabbet ledge.
A rabbet ledge is required for a double-casement window or a double-leaf door with a loose frame, that is, a frame without mullions.

Width / Depth

You can enter the dimensions for the Rabbet ledge on the inside or on the outside.

Fittings

Hinge side / Frame side

You can select the handle form for the hinge side and the frame side: Window handle; Door handle; Door knob; Grab bar; Door handle with rosette; Window handle with rosette; Panic hardware. Click (without) if you do not want to create handles.
Depending on the element selected, you can enter the Offset at bottom (= distance between handle and casement bottom). For the Grab bar, you can define the Diameter and Length.

Rabbet

Width - left / right

You can enter the width of the rabbet on the left and right sides.

Width - top / bottom

You can enter the width of the rabbet at the top and bottom.

Depth

You can enter the depth of the rabbet.

Secondary mullion left (only with windows of the turn type and the tilt and turn type)

Select this option to create a secondary mullion on the left side of the window.

2D opening symbol

Opened by %

You can specify the opening angle (min. 10°, max. 180°) of the window casement for specific opening symbols.

Line

You can select the line type for displaying the opening symbol graphically.
Note: The settings for the line type are taken from the selected layer if the Format from layer option is selected in the Opening symbol area on the 2D representation tab. In this case, you cannot select a line type here.

3D representation

Color

You can specify the color for the 3D representation of the casement frame.

Surface

Click the button to select a surface file (SURF file format, Allplan surface file). Click to turn off surfaces.