Defining the Location in Space

Several tools

‘Bar Reinforcement’ task area

Single Placement (area reinforcement)

Span Reinforcement (area reinforcement)

Support Reinforcement (area reinforcement)

Edge Reinforcement (area reinforcement)

Automatic Span Reinforcement (area reinforcement)

Secondary Reinforcement (area reinforcement)

‘Meshes’ task area

Single Placement

Span Reinforcement

Support Reinforcement

Edge Reinforcement

‘BAMTEC’ task area

Carpet Outline

Secondary Carpet Reinforcement

Carpet Span Reinforcement

Carpet Mounting Strips

In order to establish the relationship (the distance) between the defined spatial plane and the placement, the following parameters are available:

• Click Layer Depth to define the distance between the placement and the principal spatial plane. You can enter the value manually or use the layer depth from a view orthogonal to the reference view. To adopt the layer depth, click the layer in the corresponding view.
• Click Component Thickness or one of the buttons / / to create the relationship for the opposite layer.
• Click Concrete Cover Top or one of the buttons / / to define the distance of the bar in relation to the upper edge of the component.
• Click Concrete Cover Bottom or one of the buttons / / to define the distance of the bar in relation to the lower edge of the component.