General smart symbol properties

Tools: Smart Symbol + Modify Smart Symbol

General smart symbol properties

Mark number

Enter the item number of the smart symbol. You can enter a six-digit integer for the number.

Factor

You can define the number of superimposed smart symbol layers by entering a factor. Although the program only displays one instance of the smart symbol in plan, it manages the actual number internally.

Height

Select this check box to associate the height of the smart symbol's bottom level with a plane or reference surface.

Link

You can choose to link the smart symbol with the element (for example, a roof covering or room) where you placed it. This is important when you place the smart symbol or run analyses using reports later.

The following settings are available:

• Floor
  The bottom level of the smart symbol is at the height of the floor.
• Ceiling
  The top level of the smart symbol is at the height of the ceiling.
• Room
  Reports list the smart symbol with the associated room.
• Roof covering
  Reports list the smart symbol with the associated roof covering.
• No
  The SmartPart does not adapt to finish specifications.

Consider

When defining and modifying smart symbols, you can specify how a smart symbol placed in a room with finishing surfaces is displayed in animation and in sections.

The following settings are available:

• Floor
  The smart symbol adapts to the height of the floor in animation and sections.
• Ceiling
  The smart symbol adapts to the height of the ceiling in animation and sections.
• No
  The SmartPart does not adapt to finish specifications.

This setting applies regardless of the Place 3D smart symbols at height of lower plane setting in the Options - Smart symbols and symbols page - Smart symbols area.

Note: You can also assign one of these settings to all the smart symbols in a folder later.

Format

You can define the format properties of the smart symbol and its components:
When set to Element, every element of the smart symbol is drawn with the format properties you defined when you saved the smart symbol.
When set to Placement, all the elements of the smart symbol are drawn with the format properties assigned to the instance of the smart symbol.

Sequence

You can define the sequence in which the smart symbol and its components are displayed:
When set to Element, every individual element of the smart symbol is drawn based on the sequence that was specified when the smart symbol was saved.
When set to Placement, all the elements of the smart symbol are drawn based on the sequence assigned to the instance of the smart symbol.

More attributes

You can define additional attributes for the smart symbol.
The variables V6 to V9 are available by default.

When you click ..., you can assign and enter additional attributes as you would in the Attributes task area.

You can enter predefined values/text for the attributes when you define the smart symbol.
You can also do this when you place the smart symbol.