Span reinforcement

Module(s): Mesh Reinforcement

You can use the Span Reinforcement tool to place several meshes within a placing polygon. Recesses can be taken into account. As the meshes are associated with the placing polygon, any changes you make to the geometric outline of the polygon or to the settings are reflected in the corresponding meshes.

To place meshes by span

1. Click Span Reinforcement (How).
   

   Puede activar Mallas en superficie de una de estas formas

   • Barra de menú: Crear Ingeniería Leyenda de malla

   • Paleta: Funciones , Crear, en los siguientes módulos:

   Armadura de mallas

   • Configuración: Ingeniería, Introducción y emplazamiento de mallas
2. Enter the shell polygon or click Match in the input options to use an existing outline.
   

   1. Pulse sobre el primer punto del polígono de contorno en la superficie de trabajo.
   2. Pulse sobre el segundo punto del polígono de contorno en la superficie de trabajo.
   3. Introduzca tantos puntos adicionales como sean necesarios.
   4. Cierre el polígono.

   Con cada punto que introduzca podrá modificar la profundidad del soporte de forma manual.

3. If you work in Reinforce with 3D model mode and you have not created the shell polygon in an existing view, you need to select an existing view to which you want to add the placement in span.

   Note: If there are no views, you cannot place reinforcement in span.

4. Modify the shell polygon using the tools provided on the context toolbar and define the location of the placement in space so as to establish the relationship (distance) between the defined spatial plane and the placement (in Reinforce with 3D model mode only).
5. Click OK to confirm the settings.
6. Select the mesh type to be placed:
   • Click Mesh type to select a defined mesh type in the list or
   • Enter the mesh identifier manually or
   • Click Match to match the settings of a reinforcing steel mesh you have already placed.
7. Enter theparameters for the meshes on the Span Reinforcement Context toolbar.
8. Click OK to confirm. This places the meshes.