Tool(s): Place in Series Tool(s): Place in Series
/ 
to toggle between longitudinal and transverse placement
Number - to define the number of the bars
Bar Length - to define the length of the single bars
Bar Spacing - to define the spacing between the bars
AS/M - to define the reinforcement amount per meter
and 
- to define the displacement of the bar group in the X direction in the case of Longit. placement and in the Y direction in the case of Transv. placement.
Hooks - to define the bar end hooks
| (C) Allplan GmbH | Privacy policy |
for normal double bars.
and further specific parameters for double bars of which one (per pair) does not cover the full length.
and further specific parameters for single bars, of which every other one does not cover the full length.
and further specific parameters for double bars, of which every other pair does not cover the full length.