Configuration(s): wall programs: single slab schema Configuration(s): wall programs: single slab schema
'Panel/Reinf.' tab
Click the entity or element you want the program to dimension.
Dimension panel shape:
Dimension standard girders:
Only edge girders are dimensioned.
Dimension all standard girders:
All standard girders are dimensioned.
Dimension secondary girders / lifting bolts:
Dimension longitudinal bars / cross bars / other secondary bars:
no, all, free, welded
Dimension stirrup groups / stirrup meshes / secondary meshes:
Minimum number of secondary bars to dimension in a group:
Enter the minimum number of bars that you wish to dimension as a bundle of secondary bars.
Minimum number of secondary girders to dimension in a group:
Enter the minimum number of secondary girders that you wish to dimension as a bundle of secondary girders.
'Solid wall connections' tab
Dimension connection joints in plan
at end face / L-connections / T-connections and others:
no, on axis, outer dim.
You can make separate settings for 
grooves at end faces, 
grooves at longitudinal sides of L-connections, and 
grooves somewhere in the middle in order to specify how these grooves are to be dimensioned. The center or the outer dimensions of the MinMax box is/are dimensioned.
Max. offset from end of wall for detection of L-connections:
The program uses this value to distinguish between L-connections and T-connections.
Min. groove size for outer dimensions:
The Outer dim. dimension type can only be used when grooves are larger than the minimum size set here. Otherwise, On axis is always used.
Dimension starter bars:
no, in elevation, in plan, in both views
'Fixtures' tab
Cast-in nuts:
Other symbol fixtures:
Linear fixtures:
Surface fixtures:
Click the entity or element you want the program to dimension.
| (C) Allplan GmbH | Privacy policy |
