Configuration(s): slab programs: single panel schema, half floor Configuration(s): slab programs: single panel schema, half floor
'Basic reinforcement' tab
Standard girders:
Draw:
Yes: the program draws the standard girders in dash-dot lines.
No: the standard girders are not drawn.
Dimension:
Yes: the program creates a dimension string with the label GI for the girders.
No: the standard girders are not dimensioned.
Bars between girders:
Yes: the number of bars between two girders are output.
No: the number of bars is not printed out.
Text height: [cm]
Text height used for the bars between the girder information.
Longitudinal bars, cross bars:
Show layer1 / Layer 2:
Enter whether or not the first or second layer of longitudinal/cross bars are to be drawn in:
No: no view
All: show all bars
Free: show all free bars
Welded: show all welded bars
Dimension layer 1 /layer 2:
Enter whether or not the first or second layer of longitudinal/cross bars are to be dimensioned:
No: no dimensioning
All: dimension all bars
Free: dimension all free bars
Welded: dimension all welded bars
Draw longitudinal / cross bars with bending shape:
Indicates if bars are to be shown with bending shapes.
'Secondary bars' tab
Secondary bars:
Which types to draw:
All: show all bars
Free: show all free bars
Welded: show all welded bars
None: no view
Draw as a bundle:
None at all: secondary bars are not drawn.
Region: the program draws the full length of one secondary bar only from a bundle. The remainder is shown in outline with their direction of placing and the number off.
1 bar: one bar only from a bundle is drawn.
All: the program draws the full length of all the secondary bars in a bundle.
Which types to dimension:
All: dimension all bars
Free: dimension all free bars
Welded: dimension all welded bars
None: no dimensioning
Minimum number of secondary bars to dimension in a group:
Limit above which the program dimensions secondary bars bundles using the dimension string with the label ZE.
Draw secondary bars with bending shape:
Indicates if all the secondary bars are to be shown with bending shapes.
Arc bars: Labeling lengths:
Indicates if the lengths of the arc bars are to be labeled individually.
Text height [cm]:
The text height used for the labels on arc bars.
'Secondary girders' tab
Secondary girders / shear girders:
Draw:
No: secondary girders / shear girders are not drawn.
Region: the program draws the full length of one secondary girder / shear girder from a group. The remainder is shown in outline with their direction of placing and the number off.
1 bar: one secondary girder / shear girder only from a group is drawn.
All: all the secondary girders /shear girders from a group are drawn.
Minimum number of secondary girders / shear girders to dimension in a group:
Limit above which the program dimensions secondary girders / shear girders using the dimension string with the label ZT / ST.
'Meshes+Stirrups' tab
Secondary meshes / Stirrup meshes / Stirrup groups:
Draw:
Enter whether or not secondary meshes / stirrup meshes /stirrup groups are to be drawn in.
Dimension:
Enter whether or not secondary meshes / stirrup meshes / stirrup groups are to be dimensioned using the dimension string with the label ZM.
| (C) Allplan GmbH | Privacy policy |
