Lattice girders configuration entry

Configuration(s): Half floor: entry

Static load capacity:

The bottom booms of the lattice girders are taken into account in the calculations. Note that for fitted panels, a narrow girder spacing can lead to a higher as-value than for a standard panel. It can also result in a reduced level of reinforcement being used.

Place girder only up to panel width of …

[cm] 1 girder is used up to a panel of this width. For a wider panel, at least 2 should be used.

Rotate girders:

Specify whether girders are rotated when attached reinforcement is used. When you check this box, girders are rotated by 180° about their longitudinal axis. This affects the number of illegal zones.