Steel grade catalog

Module(s): Catalogs

'General' tab

Created on:

Date of creation of the data record.

Last modified:

The most recent modification date.

Description:

User-defined name for the steel grade.

fyk: [N/mm2]

Value for yield strength, which is required for redesign. You must enter a value.
In addition, the program uses this value for analyzing lateral force and bond in compliance with DIN 1045-1 and DIN EN.

ftk: [N/mm2]

Value for tensile strength, which is required for redesign. You must enter a value.

E-modulus: [N/mm2]

Appears in lists.

ID Number:

Some control systems require this reference number. The number is user-definable, but it must be unique.

Cross-section catalog code:

Reference to a bar cross-section catalog defined in Allplan (Tools menu, Defaults).

When creating the basic reinforcement, the program checks whether the associated bar cross-section catalog contains a definition of the current diameter as listed in the diameter catalog and the steel grade as listed in the steel grade catalog. If this is not so, the program displays an error message.

'->Standard' tab

Assignment of the individual entries to the relevant standards.

The selected entry is applicable to the selected standards. If no field is selected, the entry is valid for all the fields.