Selecting printout

Tool(s): Shear Reinforcement

Click Select printout and make a selection.

None: the program does not prepare a printout for the results.

Brief: the brief printout lists the initial values and results in a table.

• Panel number
• Panel parameters (concrete, surface properties, information on basic girder)
• Initial values (panel thickness, effective depth, longitudinal reinforcement, lateral force)
• Values for analyzing lateral force (reduced lateral force, design value of lateral force resistance, inclination of diagonal struts, maximum lateral force resistance, lateral force resistance of basic girders, additional lateral force that needs to be supported, lateral force resistance of secondary girders)
• Values for analyzing bond (existing shear force, design value of maximum shear force, inclination of diagonal struts, maximum shear force of basic girders, additional shear force that needs to be supported, maximum shear force of secondary girders in compliance with DIN 1045-1:2001-07
  or
  existing shear force, design value of maximum shear force in the joint, maximum shear force in joint, maximum shear force of basic girders, additional shear force that needs to be supported, maximum shear force of secondary girders in compliance with DIN 1045-1:2008-08 and DIN EN 1992-1-1:2011-01)
• Information on the secondary girder (type, offset, length)