Recess parameters

Tool(s): Recesses

Whenever you create a recess, you can alter its parameters by clicking Properties.

Outline

Specify the outline of the opening in plan.

Note: Before you can select the Freeform opening from symbol catalog type, you need to create the outline of an opening in plan view using the tools in the Draft module and save it as a symbol. The length and width of the opening are based on the maximum length and width of the symbol and cannot be changed.

Parameters

Depending on the type of opening you want to use, you can set the following parameters here:

Size

Depending on the type of opening you want to use, the following dimensions are available:

Top level = TL Slab, Bottom level = BL Slab

Check the relevant box to specify whether the recess is inserted from the top or bottom into the slab.

Height

This is where you can define the depth of the slab recess.

You can specify whether the recess is inserted from the top or bottom into the slab by checking the Top level = TL Slab or Bottom level = BL Slab box. If both check boxes are enabled, the recess pierces the slab completely; however, the recess is still regarded as a recess and not as an opening.

Height association

Click Height... to define the height of the opening. You can define the height as an absolute value. You can also associate the height of the element with default or custom reference planes or relative to other building elements.

Top, bottom

The height setup is represented by icons. Click Height... to make changes.

Open/save favorite file

Click to save recesses or openings defined as favorite files.
Click to retrieve saved favorite files.

Smart symbol

To insert smart symbols that have already been defined into the opening, click the icon and select a smart symbol in the catalog. Click to replace smart symbols you have already inserted.