Label pattern for element plan

Tool(s): Element Plan

You can save the labels added manually to associative views as label patterns, which you can then use for additional element plans. Using this approach, you can create all the labels with a single click and thus give the element plans a uniform appearance.
Labels of placements that are not to be displayed are not created even if the label pattern includes the labels of these placements. The label pattern is saved with the element plan and thus unaffected by any changes you make to the component.

To create a label pattern

1. Place a Concrete Component in an empty drawing file and create the Element Plan.
2. Use the Label and Dimension Line, Label tools to label the reinforcement in the associative views of the element plan.
3. Open the Element Plan tool again and choose the layout you selected beforehand.
4. In the Element plan palette, Label area, click Save as a label pattern and specify a folder and name for the *.lbx file.

   You can now use the label pattern for other element plans by clicking the icon beside the Bar label parameter and selecting the required file.
   Click Load label pattern to select a different label pattern. Click the icon beside the Bar label parameter again to switch off the label pattern.