Palette for Window/Door SmartPart, Elements + Window SmartParts + Door SmartParts Palette for Window/Door SmartPart, Elements + Window SmartParts + Door SmartParts
You can define the following parameters for the Mullion, Transom and Cross profile elements:
Subdivision
Type
1:1: results in fields of the same size. Specify how many Fields you want to create. You can enter a value between 2 and 30.
1:n: results in fields divided at the ratio of 1:n. Enter the division ratio in the boxes beside Left/right.
Fixed width on the left or 
Fixed height at bottom: enter the width of the casement or leaf on the left or at the bottom in the box beside Left/right or Bottom/top. The width of the casement or leaf on the right or at the top is calculated accordingly.
Fixed width on the right or 
Fixed height at top: enter the width of the casement or leaf on the right or at the top in the box beside Left/right or Bottom/top. The width of the casement or leaf on the left or at the bottom is calculated accordingly.
Fixed width centered (except Transom): enter the width of the casement or leaf in the middle in the box beside Centered/outside; this is for triple-casement windows or triple-leaf doors. The remaining width is distributed evenly over the two other elements.
Mullion / Transom
Width/depth
You can enter the width and depth of the mullion or transom.
Alignment 
Centered, 
Flush with outside, 
Flush with inside
You can specify the position of the mullion or transom in relation to the center line of the frame. When set to Flush with outside/Flush with inside, the outer/inner edge of the mullion or transom is flush with the edge of the frame. When set to centered, the mullion or transom is placed in the middle of the frame depth.
Offset
The drop-in point of the mullion or transom, which is defined along with the Alignment parameter, is moved by the offset value you enter here.
3D representation
Color
You can specify the color for the frame in 3D.
Surface
Click the button to select a surface file (SURF file format, Allplan surface file). Click 
to switch off surfaces.
| (C) Allplan GmbH | Privacy policy |
