Palette for Window/Door SmartPart, Elements + Window SmartParts + Door SmartParts Palette for Window/Door SmartPart, Elements + Window SmartParts + Door SmartParts
You can specify the following parameters for the Leaf element type:
Leaf
Opening type
You can select the opening type.
Turn around
You can change the position of the leaf from the inside of the opening to the outside and vice versa.
Stop - left / right
You can specify the opening direction.
Depth
You can enter the depth of the door leaf.
Create rabbet ledge
Select this option to create a rabbet ledge.
A rabbet ledge is required for a double-casement window or a double-leaf door with a loose frame, that is, a frame without mullions.
Width / Depth
You can enter the dimensions of the Rabbet ledge provided this option is selected.
Fittings
Hinge side / Frame side
You can select the handle form for the hinge side and the frame side: 
Window handle; 
Door handle; 
Door knob; 
Grab bar; 
Door handle with rosette; 
Window handle with rosette; 
Panic hardware. Click 
to switch off handles.
Depending on the element selected, you can enter the Offset at bottom (= distance between handle and leaf bottom). For the Grab bar, you can define the Diameter and Length.
Rabbet
Width - left / right
You can enter the width of the rabbet on the left and right.
Width - top / bottom
You can enter the width of the rabbet at the top and bottom.
Depth
You can enter the depth of the rabbet.
Secondary mullion left (only with windows of the turn type and the tilt and turn type)
By selecting this option, you place the secondary mullion on the left.
2D opening symbol
Opened by %
You can specify the opening angle (min. 10°, max. 180°) of the line representing the door leaf in door swing symbols.
Line type
You can select the line type to be used to graphically display the door swing symbol.
Note: The settings for the line type are taken from the selected layer if the Format from layer option is selected in the Opening symbol area on the 2D representation tab. In this case, you cannot select a line type here.
3D representation
Color
You can specify the color for the leaf in 3D.
Surface
Click the button to select a surface file (SURF file format, Allplan surface file). Click to switch off surfaces.
| (C) Allplan GmbH | Privacy policy |
