Options, reinforcement, representation

Overview of options (Overview of options, Configurations)
Saving, retrieving and resetting options

You can make general settings for the Bar Reinforcement and Mesh Reinforcement modules in this dialog box.

You can make settings in the following areas:

Representation in general

You can define settings for displaying reinforcing bars. These settings also apply when you convert the reinforcement model to 3D elements.
If you print layouts or display bars with the Wireframe view type in Plan, the program uses the settings in the Bar reinforcement area.

Bend

You can define how bending shapes look: Smooth or Angular.

Bar cross-section

You can define how bar cross-sections look. You can choose between Square, Octagon, 16-gon or the Axis of the reinforcement.

Bar reinforcement

Detailed information on the following options is provided in "Representation, bar reinforcement":

Display on screen as a

Display cross-section as a

Bending pin

Print double line when scale is set to at least

Print fill when scale is set to at least

Meshes

Detailed information on the following options is provided in "Representation, mesh reinforcement":

Representation in general

Bent-up meshes: main diagonal line only

Mesh overlap in sections

Line length for group display

Mesh cutting diagram

Detailed information on the following options is provided in "Representation, mesh cutting diagram":

Representation

Distribution

Bent-up meshes and spacers

Table for total weight

Number of rows, columns

Excess

Text height, width for headings of page

Text height, width for labels of mesh sections

Text height, width for text in lists