Design configuration entry

Configuration(s): Brick wall: entry

Initial values for wall element design.

'Parameters' tab

Shortening at BL:

[m] Initial value for the shortening of brick walls to form the architectural wall.

Additional text for mark number:

Complementary text for mark number.

'Outer leaves' tab

Surface visible/invisible:

Enter the text describing the surfaces that is entered as an initial value when the module opens. The Triangle symbol indicates the visible side.

'Marks' tab

Assignment of marks:

Specify which mark numbers are assigned to precast elements when they are created. Elements that are modified later are also given the mark numbers specified here. This also applies if you have rearranged the elements manually using the Modify Mark Number tool in the meantime.

Zero: the elements are initially assigned the mark number zero and will be rearranged manually later.

Ascending: the elements are assigned numbers in ascending order.

Identical: while creating elements, the program automatically performs various checks based on the following criteria:

• Identical geometry (volume, outline, recesses, ...)
• Identical element attributes (material, …)
• Identical number and position of fixtures and identical fixture attributes and variables
• Identical reinforcement (position of reinforcement in precast element, parameters, bar parameters such as bending pin diameter, hook lengths, …) and reinforcement attributes (e.g. steel grade)