Basic: Walls, Openings, Components

Engineering family
Module(s): Basic: Walls, Openings, Components

Application

• To draw a 3D general arrangement drawing for a building.
• To draw a 2D general arrangement drawing for a building.

Notes

• A 3D general arrangement drawing considerably facilitates the process of placing reinforcement using the 3D model (see chapter "Reinforce with or without 3D model?").
• A story is modeled based on architectural components (walls, columns, etc.):
  • When a component height is entered, a 3D general arrangement drawing is generated.
  • When the component height is set to 0, a 2D general arrangement drawing is generated. When a 2D floor plan is created in this manner, component-specific hatching is generated automatically.
• Views and sections can be created in three ways:
  • Using the tools in the Associative Views module: any changes in the component geometry or reinforcement are automatically displayed in all the views and sections.
  • Using the tools in the Shell module: any changes in the component geometry or reinforcement are automatically displayed in all the views and sections.
  • Using the Clipping Path tool in the General: Roofs, Planes, Sections module: the reinforcement is not displayed automatically. This tool is thus not suitable for reinforcement drawings. Changes made to the component geometry are nevertheless taken into account
• Create dimensions using the tools in the Dimension Lines module. You can also use module-specific dimensions for associative views.