Component Height, Schematic Overview

Component Height, Schematic Overview

Tool(s): all architectual elements

Below is an overview of how architectural elements (e.g., openings) behave, depending on the height setup and the association of the top or bottom level with a reference plane.

Note: was used with inclined planes.
Alternatively, click Offset perpendicular to plane so that the offset you enter is interpreted as a value perpendicular to the inclined plane.

Top level 2.01 and
Bottom level 1.00

(1) Upper plane
(2) Lower plane

Top level -1.00 and
Bottom level –2.01

(1) Upper plane
(2) Lower plane

Top level -0.50 and
Bottom level 1.00

(1) Upper plane
(2) Lower plane

Top level -0.76 and
Bottom level 0.75

(1) Upper plane
(2) Lower plane

Top level -1.00 and
Bottom level 0.00

(1) Upper plane
(2) Lower plane

Top level and
Bottom level 0.00

(1) Upper plane
(2) Lower plane
(3) Maximum component height from BL

(C) Allplan GmbH