Configuration of list generator, wall reinforcement

List Generator Schedule defaults

Prompt cutting waste [%]:

Cutting waste for bars + stirrups:

Cutting waste for lattice girders:

Cutting waste for meshes + bent-up meshes:

The weight of the steel is increased by this factor (calculated as a percentage). When you have selected Yes for Prompt cutting waste, the program proposes the values for the cutting waste.

Bar list in measurement sheet according to:

Details: the various girder types, longitudinal, cross and additional bars are listed separately.

Girders: the lattice girders are summarized and the bar reinforcement is summarized.

Steel total: the steel total is summarized.

Detail+steel total: the various girder types, longitudinal, cross and additional bars are listed separately and the steel total is summarized.

Prompt: you can specify whether and how the bars are summarized.

Calculate lifting bolts:

No: the lifting bolts are not listed.

as lifting bolts: the weight of steel is given as lifting bolts.

as additional bars: the weight of steel is given as additional bars.

per piece: the lifting bolts are listed as per item.

Consider logistic flags at stirrup cages:

If you enable this option and you have created FF stirrup cages, the program only creates two marks per precast element for this additional reinforcement. The weight of steel is listed separately for stock items and special reinforcement.

Calculate starter bars:

Yes: the starter bars of concrete walls are included in the weight of reinforcement and in the single panel schedule.

No: the starter bars are not included in the weight of reinforcement and not in the single panel schedule.

Output weight of starter bars separately:

Yes: the weight of the starter bars is listed separately.

No: the weight of the starter bars is simply added to the weight of the additional bars.

Assign core reinforcement to:

Visible leaf: the reinforcement in the in-situ concrete layer of the thermal wall with in-situ concrete core is added to the first leaf.

Invisible leaf: the reinforcement in the in-situ concrete layer of the thermal wall with in-situ concrete core is added to the second leaf.

Its own layer: the reinforcement in the in-situ concrete layer of the thermal wall with in-situ concrete core is listed separately.