Configuration of list generator, wall calculation

'Single panel schedule' tab

Calculate element area (general):

The calculation of the area of the wall elements can be set as follows:

Outline: the areas are calculated from the element shape.

Circumscribed rectangle (LxW): the panel areas are calculated from the enclosing rectangle.

Average (outline+rectangle): the areas are calculated from the mean value of the outline and the enclosing rectangle.

Prompt: you can specify whether the panel areas are calculated from the element shape, the enclosing rectangle or the mean value.

Calculate double walls:

Element dim.: the area is calculated for the dimensions of the entire element (leaf 1 + leaf 2). The area is obtained from the outline.

Larger leaf: the larger leaf of the double wall is calculated. The decisive factor is the area of the unfinished structure without a subtraction of recesses.

Average leaves: the mean value is calculated from leaf area 1 and leaf area 2. The decisive factor is the area of the unfinished structure without a subtraction of recesses.

Height of larger leaf x average width: largest element height x average width of the two leaves.

Prompt: you can specify which method you want to use.

Print compilation list:

The sum of the individual wall elements, fitted panels and overall wall elements is calculated and output.

Standard concrete grade of double wall:

Other concrete grades are listed as ”extra charge for concrete grade” (in m2 of wall).

'Dimensions' tab

Limit height for fitted panels [m]:

Panels which are larger than the height defined are listed separately.

Limiting area I for fitted panels [m²]:

Elements with areas not exceeding this value are listed as fitted panels.

Limiting area II for fitted panels [m²]:

Elements with areas between that of fitted panels I and this value are listed as fitted panels II.

Standard thickness of DW leaf 1 / 2 [cm]:

Enter the standard thickness of the two leaves of the double wall.

Round thickness for additional concrete to:

Specify whether additional concrete is to be rounded to 0.5 cm or 1.0 cm.