Configuration of list generator, slab reinforcement

Prompt cutting waste [%]:

Cutting waste for bar + stirrup reinforcement:

Cutting waste for lattice girders:

Cutting waste for meshes + bent-up meshes:

The weight of the steel is increased by this factor (calculated as a percentage). When you have selected Yes for Prompt cutting waste, the program proposes the values for the cutting waste.

Bar list in measurement sheet according to:

Details: the various girder types, longitudinal, cross and additional bars are listed separately.

Girders: the lattice girders are summarized and the bar reinforcement is summarized.

Steel total: the steel total is summarized.

Detail+steel total: the various girder types, longitudinal, cross and additional bars are listed separately and the steel total is summarized.

Prompt: you can specify whether and how bars are to be summarized.

Lattice girder quantities in accordance with:

Use: the lattice girders are invoiced based on their actual use (instead of their types or names). In particular, this setting affects standard girders that are used as shear girders.

Girder type: the lattice girders are invoiced separately by standard girder, shear girder and Montaquick girder. You have to enter the unique reference for shear and Montaquick girders so that the program knows the differences between the girder types.

Prompt: you can specify whether lattice girders are invoiced by use or type.

For quantities in accordance with girder type:

Characteristics for shear girders:

Characteristics for Montaquick girders:

Enter the unique reference for shear and Montaquick girders if you wish to have quantities in accordance with girder type. The unique reference consists of the reference letters and a concluding underscore (e.g., KTS_, KT_).

Lattice girder weight:

Based on weight: the lattice girders are measured and listed based on their actual weight.

Based on bottom boom: the lattice girders are measured and listed based on the weight of the bottom boom.

Prompt: you can specify whether the lattice girder weight is to be calculated based on the weight or bottom boom.