Position, length

Objects dialog box

Start X

Enter the offset to the first reference point/line in the X direction (in mm.)

End X

Enter the offset to the final reference point/line in the X direction (in mm.)

Start Y

Enter the offset to the first reference point/line in the Y direction (in mm.)

End Y

Enter the offset to the final reference point/line in the Y direction (in mm.)

Start Z

Enter the offset to the final reference point/line in the Z direction (in mm.)

Length Z

Enter the length of the element in the Z direction (in mm.)

Fix XY

When you select this option, the element is not enlarged in the Z direction (e.g. at corners).

Fix Z

When you select this option, the element is resized in the Z direction when it is placed at corners (only possible with elements of the line or point type).

X offset

You can define the behavior of line elements at intersections and at edges:

Do not use X offset automatically: start X and end X are not corrected.

X offset = width/2 for vertical direction: start X and end X are corrected so that the vertical elements are not intersected.

X offset = width/2 for other direction: start X and end X are corrected so that the non-vertical elements are not intersected.

Always miter: start X and end X are not corrected. Line elements are always mitered.

Fix XY

When you select this option, the element is not enlarged in the Z direction (e.g. at corners).

Fix Z

When you select this option, the element is resized in the Z direction when it is placed at corners (only possible with elements of the line or point type).