Module(s): Catalogs Module(s): Catalogs
'General' tab
Created on:
Date of creation of the data record.
Last modified:
The most recent modification date.
Name:
User-defined name displayed in the Type list box on the Ribs tab of the panel type catalog for TT slabs.
Description:
User-defined name that can be included in labels for element plans or lists/schedules.
Geometry
You can define the cross-sectional area of the ribs below the topping slab in a table. These dimensions are used as the basis when you select the defined ribs in the panel type catalog of the TT slab.
Regardless of the position of the corners, a rib is always placed so that the upper midpoint of the min/max box of the rib cross-section and the point where the bottom level of the topping slab and the axis intersect are identical.
to insert a new point in front of the selected point in the table.
to add a point to the end of the table.
to delete the point selected in the table. '->Fact.' tab
Assignment of the individual entries to the relevant factories.
The selected entry is applicable to the selected factories. If no factory is selected, the entry is valid for all the factories.
| (C) Allplan GmbH | Privacy policy |
