Inserting roofscapes in plane models

To insert a roofscape in a plane model

• A roofscape (consisting of a roof frame and custom reference planes) has already been created in a separate drawing file/document.

1. Click Open on a Project-Specific Basis and select the Building structure tab.
2. Click Floor manager in the Open on a Project-Specific Basis: Drawing Files from Fileset/Building Structure dialog box.
3. Select the structural node to which you want to add the roofscape.
4. Click Insert roofscape in the lower part of the Floor manager dialog box.
5. In the Use roofscape from document area in the Insert roofscape dialog box, select the source which was used to create the relevant roofscape:
   • From drawing file
   • From NDW file
6. Select the relevant file and click OK twice to confirm.
7. Specify how the roofscape is to be inserted in the current plane model:
   • Do not change roofscape (compared with source).
   • The bottom level of the roofscape is equivalent to the bottom of the story; top levels are retained.
   • The roofscape as a whole is moved to the height of the bottom of the story.
8. Click OK to confirm.

   The roofscape is inserted under the selected node and displayed in the graphics.

9. Click OK to close the Floor manager.

Next step: create planes of roofscape in drawing files