|
|
|
Syntax
OPTION arg1 arg2 arg3 arg4 arg5 arg6 arg7
Description
Calculation options for the schedule analysis, in particular for the definition of load sums, are defined.
Arguments
Minimum quantity: 2
arg1
Value |
Dimension |
Meaning |
CALCULATION |
KEYWORD |
The calculation of the construction plan is switched on or off. |
LCSUMTOT |
KEYWORD |
The name of the load case for the total sum follows as the next argument. |
LCSUMSW |
KEYWORD |
The name of the load case for the self-weight sum follows as the next argument. |
LCSUMPT |
KEYWORD |
The name of the load case for the pre-stress sum follows as the next argument. |
LCSUMCS |
KEYWORD |
The name of the load case for the creep and shrinkage sum follows as the next argument. |
LCSUMSDL |
KEYWORD |
The name of the load case for the SDL sum follows as the next argument. |
SUBMODEL |
KEYWORD |
The construction plan is executed in a submodel in a subdirectory. This option must be used when using prefabricated girders. The construction plans of prefabricated girders are combined in the main construction plan of the structure. |
arg2
Value |
Dimension |
Meaning |
ON |
KEYWORD |
The calculation of the schedule is switched on (arg1 = CALCULATION) or the summation of a certain type (arg1 = LC*") is activated. In the case of arg1 = SUBMODEL, calculation of the construction plan is activated in a sub-model. |
OFF |
KEYWORD |
The calculation of the schedule is switched off (arg1 = CALCULATION) or the summation of a certain type is deactivated. In the case of arg1 = SUBMODEL, calculation of the construction plan in a submodel is deactivated. |
arg3 (arg1 = LCSUM*)
Value |
Dimension |
Meaning |
lcsum |
TEXT |
Name of the load sum; each name is completed by the day on which the sum was formed. For example, the result "SW-SUM(32)" contains the load sum of the dead weight on day 32. |
arg4 (arg1 = LCSUM*)
Value |
Dimension |
Meaning |
lcinc |
TEXT |
Name of the load increment; The load case contains the increment of the results (state of the current sum - state of the last summation). |
arg5 (arg1 = LCSUMCS)
Value |
Dimension |
Meaning |
crdur |
INT |
Duration of end creep |
arg6 (arg1 = LCSUMCS)
Value |
Dimension |
Meaning |
crstp |
INT |
Number of logarithmic stepd during end creep |
arg7 (arg1 = LCSUMCS)
Value |
Dimension |
Meaning |
DEL |
KEYWORD |
The intermediate steps of the end creep are taken into account. The load sums on these intermediate days are then deleted again to save space. |
Scopes
CONSTRUCTION
Examples
OPTION CALCULATION ON
OPTION LCSUMTOT ON "SUM"
OPTION LCSUMSW ON "SW-SUM" "SW"
OPTION LCSUMPT ON "PT-SUM" "PT"
OPTION LCSUMCS ON "CS-SUM" "CS" 36500 7
OPTION LCSUMSDL ON "SDL-SUM" "SDL"
Typical settings for static analysis. The different load sums are defined and the so-called end creep is determined.
|
(C) ALLPLAN GmbH |
Privacy policy |
