|
|
|
Syntax
ACTIVATE arg1 arg2 arg3 arg4 arg5 arg6
Description
To simplify the input of various properties of the tendons, the properties can be activated. These properties then apply to all subsequent tendons.
Arguments
Minimum quantity: 2
arg1
Value |
Dimension |
Meaning |
PROPERTY |
KEYWORD |
Various attributes follow as the next arguments. |
arg2 (arg1 = PROPERTY)
Value |
Dimension |
Meaning |
TTYPE |
KEYWORD |
The pre-stress type follows as the next argument. |
MATERIAL |
KEYWORD |
The material properties follow as the next arguments. |
TSECTION |
KEYWORD |
The section details follow as the next arguments. |
TFRICTION |
KEYWORD |
The friction details follow as the next arguments. |
ANCHORB |
KEYWORD |
The name of the anchor follows as the next argument. |
ANCHORE |
KEYWORD |
The name of the anchor follows as the next argument. |
HOOK |
KEYWORD |
The parameters of the hooks follow as the next arguments (PRETENSION only). |
LDEBOND |
KEYWORD |
The debonded lenghts follow as the next arguments. |
LANCHOR |
KEYWORD |
The anchorage lengths follow as the next arguments. |
arg3 (arg2 = TTYPE)
Value |
Dimension |
Meaning |
POSTTENSION |
KEYWORD |
Prestressing with subsequent bonding (default): Older models do not yet distinguish the property, therefore this property applies if not specified). |
PRETENSION |
KEYWORD |
Pretensioning with immediate bonding. A tendon of this type does not have a duct and always consists of only one strand. |
arg3 (arg2 = MATERIAL)
Value |
Dimension |
Meaning |
mname |
TEXT |
The material name can be chosen arbitrarily. Materials are classified in Allplan Bridge under the selected standard or its annex. Therefore, the material name to be entered here consists of 2 parts, separated by colon: "stdname:matname". If the material is not known in the project, then certain calculations will not be possible and the material will only be identified by name in various places. |
arg4 (arg2 = MATERIAL)
Value |
Dimension |
Meaning |
DMETAL |
KEYWORD |
Duct material Metal |
DPLASTIC |
KEYWORD |
Duct material Plastic |
arg3 - arg5 (arg2 = TSECTION)
Value |
Dimension |
Meaning |
dduct |
LSMALL |
Duct diameter (not for PRETENSION) |
astrand |
ASTRAND |
Strand area |
nstrand |
INT |
Number of strands (1 for PRETENSION) |
arg3 - arg5 (arg2 = TFRICTION)
Value |
Dimension |
Meaning |
my |
DOUBLE |
Friction |
bwobble |
[rad]/LSTRUCTD |
Unintended deviation |
kappa |
DOUBLE |
Friction factor |
arg3 (arg2 = ANCHORB or arg2 = ANCHORE)
Value |
Dimension |
Meaning |
anchor |
TEXT |
Name of the Allplan macro that represents the geometry of the anchor in the Allplan model. |
arg3 (arg2 = HOOK)
Value |
Dimension |
Meaning |
TBEG |
KEYWORD |
This is followed by up to 3 inputs for the hook at the start of the beam. |
TEND |
KEYWORD |
This is followed by up to 3 inputs for the hook at the end of the beam. |
BOTH |
KEYWORD |
This is followed by up to 3 inputs for the hook at both sides of the beam. |
arg4 - arg6 (arg2 = HOOK)
Value |
Dimension |
Meaning |
hl1 |
LSTRUCTD |
Length of first piece |
hl2 |
LSTRUCTD |
Length of 2nd piece or 0.0 |
hf3 |
DOUBLE |
Factor for the calculation of the 3rd piece or 0.0 |
arg3 - arg4 (arg2 = LDEBOND)
Value |
Dimension |
Meaning |
dl1 |
LSTRUCTD |
Unbonded region at begin |
dl2 |
LSTRUCTD |
Unbonded region at end, default: dl2 = dl1 |
arg3 - arg4 (arg2 = LANCHOR)
Value |
Dimension |
Meaning |
al1 |
LSTRUCTD |
Anchorage region at begin |
al2 |
LSTRUCTD |
Anchorage region at end, default: al2 = al1 |
Scopes
TGROUP
Examples
ACTIVATE PROPERTY MATERIAL "EN:Y1860S7-15,2" DMETAL
The tendon material "EN:Y1860S7-15,2" and the duct material DMETAL are specified.
ACTIVATE PROPERTY TSECTION 0.100E+03 0.15000E+03 19
The section properties are defined.
ACTIVATE PROPERTY TFRICTION 0.200000000 0.007000000
The friction parameters are defined.
|
(C) ALLPLAN GmbH |
Privacy policy |
