TCL Command POINT

Syntax

POINT arg1 arg2 arg3 arg4 arg5 arg6 arg7

Description

Input of a reference position and optional positioning of an "Allplan Smart Placement".

Arguments

Minimum number: 3

arg1

Value	unit	Meaning
pname	TEXT	Point name

arg2

Value	unit	Meaning
LSECT	KEYWORD	Reference point defined by a point of intersection of two parametric lines
POINT	KEYWORD	Reference point defined by a parametric point

arg3 - arg4 (arg2 = LSECT)

Value	unit	Meaning
line1[:i]	TEXT	Name of the 1st reference line of the point of intersection; the optional suffix ":1" or ":2" determines the number of the point of intersection if an arc is part of the intersection. As there can be up to two points of intersection, one of the two must be determined. This can be on either the first or second clipping line.
line2[:i]	TEXT	Name of the 2nd reference line of the point of intersection; the optional suffix ":1" or ":2" determines the number of the point of intersection if an arc is part of the intersection. As there can be up to two points of intersection, one of the two must be determined. This can be on either the first or second clipping line.

arg5 (arg2 = LSECT)

Value	unit	Meaning
APLACE	KEYWORD	This is followed by positioning an Allplan Smart Placement with the following arguments.

arg6 (arg2 = LSECT)

Value	unit	Meaning
0	INT	Smart Placement is deactivated at each station where the cross-section was assigned
1	INT	Smart Placement is selected at each station where the cross-section was assigned
apvar	TEXT	Activation of the smart placement by a variable (type NONE) whose value at the station is 0 or 1

arg7 (arg2 = LSECT)

Value	unit	Meaning
-	-	If no entry is made, the direction of the placement is the local Y direction.
YG	KEYWORD	The direction of placement is the global Y direction.

arg3 (arg2 = POINT)

Value	unit	Meaning
pname	TEXT	Name of the parametric point

arg4 (arg2 = POINT)

Value	unit	Meaning
APLACE	KEYWORD	This is followed by positioning an Allplan Smart Placement with the following arguments.

arg5 (arg2 = POINT)

Value	unit	Meaning
0	INT	Smart Placement is deactivated at each station where the cross-section was assigned
1	INT	Smart Placement is selected at each station where the cross-section was assigned
apvar	TEXT	Activation of the smart placement by a variable (type NONE) whose value at the station is 0 or 1

arg6 (arg2 = POINT)

Value	unit	Meaning
-	-	If no entry is made, the direction of the placement is the local Y direction.
YG	KEYWORD	The direction of placement is the global Y direction.

Scopes

CGREF

Examples

POINT "Bearing_L" LSECT "L48" "L49" APLACE "Bearings"

Definition of the position of bearing "Bearing_L" at the point of intersection of the lines "L48" and "L49". The point also determines the position of the "Allplan Smart Placement" of the same name, whereby its activation along the component is controlled by the "Bearings” variable.