|
|
|
Syntax
BLOSS arg1 arg2 arg3 arg3
Description
A Bloss curve is added to the previous element. Start point and angle are determined by the previous element.
Arguments
Minimum quantity: 3
arg1
Value |
Dimension |
Meaning |
0RL |
KEYWORD |
The Bloss curve starts with bend 0 and ends with defined radius. |
R0L |
KEYWORD |
The Bloss curve starts with defined radius and ends with bend of 0. |
RRL |
KEYWORD |
The Bloss curve starts with and ends with defined radii. The following rules must be adhered to: R1 != 0 and R2 != 0 and R1 * R2 > 0. |
arg2 (arg1 != RRL)
Value |
Dimension |
Meaning |
r |
LSTRUCTD |
Start or end radius of the Bloss curve. |
arg3 (arg1 != RRL)
Value |
Dimension |
Meaning |
ds |
STATION |
Length of the Bloss curve (station difference) |
arg2 (arg1 = RRL)
Value |
Dimension |
Meaning |
r1 |
LSTRUCTD |
Start radius of Bloss curve. |
arg3 (arg1 = RRL)
Value |
Dimension |
Meaning |
r2 |
LSTRUCTD |
End radius of Bloss curve. |
arg4 (arg1 = RRL)
Value |
Dimension |
Meaning |
ds |
STATION |
Length of the Bloss curve (station difference) |
Scopes
PLAN
Examples
BLOSS 0RL -252 73.5867
CIRCLE DSR 138.8845 -252
BLOSS R0L -252 73.5867
Transition from bend 0 to a circular arc with radius -252, then transition from circular arc to bend 0.
|
(C) ALLPLAN GmbH |
Privacy policy |
