TCL Command BIMPLUS

Syntax

BIMPLUS arg1 arg2 arg3 arg4 arg5 arg6

Description

BIMPLUS reference of the axis. If the axis references a BIMPLUS axis, then a connection to the BIMPLUS project is established during the calculation and the axis is re-imported. This dynamic connection can be switched off.

Arguments

Minimum quantity: 1

arg1

Value	Dimension	Meaning
guid	GUID	Reference to a BIMPLUS model

arg2

Value	Dimension	Meaning
name	TEXT	Name of the reference axis in the BIMPLUS model

arg3 - arg6

Value	Dimension	Meaning
OFF	KEYWORD	Connection to BIMPLUS project during calculation is not established.
KINKSON	KEYWORD	An axis in Allplan Bridge is C1-smooth (end angle of the axis element = start angle of the following axis element). This condition is not always met by input data. This keyword activates the generation of kinks if the imported angle differences are out of tolerance (KINKSTOL). Kinks in the axis definition can create unwanted effects in the cross sections of the structural member if a selected station lies exactly on a kink.
KINKSTOL	KEYWORD	Specification of the angle tolerance follows as the next argument
angle	ANGLED	Angle tolerance if previous argument KINKSTOL. Kinks are inserted when axis elements touch each other with large angular difference.

Scopes

AXIS

Examples

BIMPLUS "c78cc110-975f-4abb-8e88-123456789012" "Axis_1" KINKSON KINKSTOL 0.010000

Connection of the Allplan bridge axis to a BIMPLUS axis is established and import rules are defined.