Link Girders

Multiply copy a certain link girder to various positions

To multiply copy a link girder to various positions

1. Click Multiple Copy / Link Girder.
2. Click the link girder in the view window of the 3D model which you want to copy.
3. Optionally, edit the name via the Prefix and a number for the Postfix and the Postfix step of the link girder in the opening window.

   Note: The name results from prefix & postfix, whereby the postfix is increased by the postfix step for all further names.

4. Choose via the selection box Variation in the same window, if the existing variations of the link girder to be copied should be taken over for the copied link girders.
5. Confirm the input with OK.
6. Click the first reference point (Geometric Position 1) in the 3D model at which the axis of the link girder should be connected.
7. Click the second reference point (Geometric Position 2) in the 3D model at which the axis of the link girder should be connected.
8. Repeat the steps 6 and 7 to copy the selected link girder once again, or quit the tool with ESC.